Advice on new track pump?

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Advice on new track pump?

Postby Amy » Sun Jan 04, 2015 8:47 pm

My old Joe Blow has been 'borrowed' from the garage where it has been for many years now so I am looking for a new track pump.

Cycle Surgery has 4 different models of the Joe Blow, Evans has 9!! - any recommendations? Looking for something that'll last, easy to use and not too expensive... Will be kept in flat.

Cheers 8)
User avatar
Amy
lives on this board 24/7!!!
 
Posts: 2956
Joined: Mon Aug 04, 2003 12:59 pm
Location: Back where she started

Re: Advice on new track pump?

Postby George B » Sun Jan 04, 2015 11:16 pm

Amy,

I have a track pump from Clas Ohlson, in Croydon. I've had it for 2 to 3 years with no problems at all. Their site shows it still for sale at £19.99 (with 2 yr guarantee). It caters for 3 different valve types and I think it it does 160 psi although I've only used my one up to 120 psi. See Asaklitt Bicycle Pump with Pressure Gauge.
George B
is new here, be extra Agreeable to them!
 
Posts: 6
Joined: Thu Aug 04, 2011 1:26 pm

Re: Advice on new track pump?

Postby MattR » Mon Jan 05, 2015 11:04 am

For some reason I've brain washed myself into continually buying Blackburn Designs pumps, I've got about 10 now of all shapes and sizes. This is mainly because it was the sales pitches I used to give when I was the shop boy. Anyway, I keep buying them mainly because of the Life-Time warranty, but they are awful at honouring it outside of the States. I've had a bit more success recently, and I have to admit my TP-4 is a quality pump, now that it's been serviced. I do have a lot of problems with all of them though.

Dad has a Topeak JoeBlow a cheepy one and it is horrible, cheap materials, and the barrel is way to large a volume so it is hard to get a pressure above 100psi without extraneous effort.

We have a Lezyne that belongs to work and they look the absolute business quality wise and build, but in action it is awful because it screws onto the valve and often unscrews the valve when you try to remove it and thus letting all the air out of it.

Therefore, honestly I don't know what the answer to this question is either.
User avatar
MattR
...
 
Posts: 150
Joined: Mon Feb 24, 2014 9:52 pm
Location: Addiscombe

Re: Advice on new track pump?

Postby Amy » Tue Jan 06, 2015 11:01 am

Cheers, gone for a Joe Blow as have had no problems with previous one... she said with fingers crossed.
User avatar
Amy
lives on this board 24/7!!!
 
Posts: 2956
Joined: Mon Aug 04, 2003 12:59 pm
Location: Back where she started

Re: Advice on new track pump?

Postby Marek » Thu Jan 08, 2015 9:19 pm

I have had this one for about 11 years, no problem at all, still going strong:

http://www.fawkes-cycles.co.uk/1291045/ ... tAodH0YAjw
Marek
lives on this board 24/7!!!
 
Posts: 1969
Joined: Sat May 03, 2003 4:21 pm

Re: Advice on new track pump?

Postby Amy » Fri Jan 09, 2015 2:04 pm

[quote="Marek"]I have had this one for about 11 years, no problem at all, still going strong:

http://www.fawkes-cycles.co.uk/1291045/ ... tAodH0YAjw


Thanks, they probably don't make'em like they used to! But I will bear in mind some of these suggestions should anything happen to the Joe Blow (got some funny looks from people at work and on the train when I took it home...)
User avatar
Amy
lives on this board 24/7!!!
 
Posts: 2956
Joined: Mon Aug 04, 2003 12:59 pm
Location: Back where she started


Return to General

Who is online

Users browsing this forum: No registered users and 8 guests

cron