Power Tap ?

[Rob W]

I was using my PT today and there seems to be a problem with the watts they are coming out way to high.I was doing 1300 watts and i was only cruising.When the bike is not moving it is going back to 0 as it should do.So has anyone got any ideas what this could be,and im sure its not a sudden bit of forum,which would have been nice on Saturday.

[DavidKennett]

[quote="Rob W"]I was doing 1300 watts and i was only cruising.When the bike is not moving it is going back to 0 as it should do.

[Keith]

Agree with DK. Details of how to "Zero Torque" on page 15 of [url=http://www.saris.com/pdfManuals/360.pdf]this document[/url].

[Rob W]

Cheers for the info.I hope it works,i have a feeling that its more than zeroing the torque.As when the bike is stationary the reading is zero.But i`ll give it a go tomorrow.Cheers

[Keith]

If that fails, in time-honoured helpline fashion, try turning it off and on again - take the batteries out of the computer unit (and leave them out for 5 minutes) to try & reset things completely?

You may well need to "re-learn" your PT unit & HR strap after that which can take a little while - the LYC user-interface isn't the best

[Rob W]

If the zeroing doesn't work then I'll try the batteries thing.It's annoying all this cause it was working fine last week.

[DavidKennett]

If the zero doesn't work and you take out the battery, re-learn by downloading from PowerAgent menu if you use that, Tools, Configure Device...

[George]

Purchase a Joule 2.0 and just do it properly, stop messing around

[Rob W]

George I'd love to,may be I come into a bit of spare cash.I had success to day by zeroing the torque so all is well.So thanks alot gentlemen for the help.