Powertap and Garmin - speed reading

A Place to idle the day away talking about anything you fancy. Expect to find cycling and non cycling topics inside

Powertap and Garmin - speed reading

Postby Phil H » Sat Sep 26, 2015 1:37 pm

Recently, when using my Powertap wheel, the speed (and distance) on my Garmin has been under-reading. Often half of the speed that the person next to me is getting. It's intermittent. I suspect that I shouldn't have updated my Garmin firmware as that often causes trouble. It seems not to be calibrating the wheel size to the rotation sensor properly.

I've Googled but there's nothing obvious out there. Anyone else had this?

Or is it that my old Edge 705 just needs replacing with something new and shiny.
User avatar
Phil H
Site Admin
 
Posts: 1883
Joined: Thu Sep 10, 2009 10:52 pm

Re: Powertap and Garmin - speed reading

Postby Alan C » Sat Sep 26, 2015 11:36 pm

Just a thought.

My Garmin should be measuring the speed from the speed sensor, which is wirelessly connected to it, but I have my suspicion that its not detecting it (battery failed or something?). When that is the case it uses the GPS signal to measure speed. (as I know it did before I got the speed sensor).

When I used to ride around with only GPS speed, going along a road which was tree lined, especially when the branches cross the road, the indicated speed would drop off dramatically.

Perhaps something similar is happening to you?
Alan C
is new here, be extra Agreeable to them!
 
Posts: 6
Joined: Wed Oct 22, 2014 8:08 am

Re: Powertap and Garmin - speed reading

Postby Phil H » Sat Sep 26, 2015 11:55 pm

I don't think so. I ride sometimes with and sometimes without the Powertap wheel. Yes, when it's not on there I do get GPS dropouts (which manifest as a short period of 0mph followed by a spike of ... well I've seen 481mph coming out of a tunnel in the Alps). This is a consistent low reading for several miles.

I've replaced the battery in the Powertap and that all seems well. In fact the power data seems fine - about what I'd expect for hauling a fat bloke along (I know what 200W, 300W and 500W feel like).

Tempted to reformat the Garmin and go back a revision on the firmware. Or put the "nice" back wheel back on.

Interestingly, Tom borrowed that wheel for the President's 10 and his data for that looks fine.
User avatar
Phil H
Site Admin
 
Posts: 1883
Joined: Thu Sep 10, 2009 10:52 pm

Re: Powertap and Garmin - speed reading

Postby MattR » Mon Sep 28, 2015 10:00 am

[quote="Phil H"]Often half of the speed that the person next to me is getting.


It's because Tom is going twice as fast as you :P
User avatar
MattR
...
 
Posts: 150
Joined: Mon Feb 24, 2014 9:52 pm
Location: Addiscombe


Return to General

Who is online

Users browsing this forum: No registered users and 28 guests

cron